4” 2 WIRE REWINDABLE OIL FILLED SUBMERSIBLE MOTOR
Technical features
• Rewindable.
• Built in capacitor.
• Built in thermal overload.
• Upper bracket: Nickel plated cast iron. SS304 cover sheet / Brass / SS316 available.
• Motor case: SS 304.
• Motor shaft: SS 304.
• Shaft extention and coupling: NEMA standard.
• High quality radial and thrust ball bearings.
• Winding: enameled copper – Class F insulation.
• Degree of protection IP68/Class B insulation.
• Max temp. 35° with water cooling flow min. 0.08 m/s.
• Max depht immersion: 150 m.
• Nos. of start per hour: max 30 at regular intervals.
• Over-dimensioned sand slinger .
• Mechanical seal: graphite/ceramic. SiC/SiC or SiC/Al mechanical seal available as option.
• Coolant: dielectric non toxic high quality lubricant.
• Motor cable length: 1,75 m (2 wires plus ground).
• Voltage variation: +/-10%.
• Suitable for horizontal operation.
Motor range versions:
Single Phase: 0.37kW (0.5hp) to 1.1kW (1.5hp), 220-230V / 50Hz (or 60Hz).
Other voltage and frequencies available upon request